Mobile tyre racking system reimagined: maximum density, minimum effort.

It consists of fully mobile single rack units rather than fixed high racking. In the LoggyStore system, each unit holds up to 24 tyres or wheels (6 sets of wheels, up to 22 inches) and can be moved even when fully loaded. So the units can be pushed tightly together, with aisles opened only where wheels are being retrieved or loaded.

Not with this quality and durability – the secret lies in the special castors. All of them are polyurethane swivel castors, so a LoggyStore unit turns on the spot. And even loaded with 24 wheels, it moves off with low breakaway torque and very little effort. Just try that with anything else …

As a guide, around two sets of wheels per square metre. Examples from real projects: 774 sets of wheels on 340 m², 636 on approx. 292 m², 320 in a 16.5 × 9 m side room. We will gladly work out the exact capacity of your space from your floor plan.

With the three-tier LoggyStore, a ceiling height of 3 metres is enough. In lower rooms such as basements, the system runs on two tiers – the top tier is detachable.

No. All wheels are accessible at ground level, at grip height – no industrial trucks needed. And because the system fits into existing commercial space, there is no warehouse to build, no wind load report and no permit procedure.

A single unit (three tiers) costs from €790 net, the Starter Set with 10 units for 60 sets of wheels from €7,495 net, both excl. VAT and shipping. At a storage fee of €9.95 per set of wheels per month, a fully occupied Starter Set pays for itself in about 13 months.

Yes. Fixed high racking is practically impossible to clear in a fire. With the LoggyStore system, two people can evacuate around 1,000 wheels, racking included, in approx. 23 minutes – reducing the fire load even once a fire has started. That is impossible with fixed racking. Raise this with your fire insurer too.

An external wheel hotel costs you access, time and margin. A sea container exposes customers' wheels and your staff to heat, frost and condensation, and is cramped and impractical. Your own fully mobile tyre racking system in existing space gives you immediate access, full control and the storage revenue for yourself.

Handcrafted in Bavaria from top-grade steel – square and round tubing (45 mm, 2 mm wall thickness) – blasted and then fully powder-coated in green, silver or matt anthracite, or in your corporate colour on request.

Two people can clear around 1,000 wheels including the racking units in approx. 23 minutes – no tools needed, through a standard warehouse door.

Fixed high racking is virtually impossible to evacuate in a fire; according to fire services, all that usually remains is a “controlled burn”. Because LoggyStore units are mobile, they can be cleared in an emergency or split up by fire breaks – an argument that counts with assessors and insurers.

All three tiers are at grip height – no climbing stairs, no risk of falling. Wheels are picked up directly at the racking rather than lifted from the floor, and there are no industrial trucks in the work area: the racking comes to the employee, not the other way round.

The LoggyStore system stays mobile even when fully loaded: simply roll it out of the store and back in elsewhere – no need to unload the wheels first.

Yes. You decide how much space to leave between the rows and can change the aisle width at any time.

Evacuation time and ground-level working also matter to your fire insurer, your statutory accident insurer and your works council – make a point of raising these advantages with them.

A tyre trolley is a wheeled trolley for mobile wheel preparation and tyre transport. The Loggyflex RT 255 by unyco holds 8 tyres of width 255 or 10 tyres of width 195, has a total load capacity of 500 kg (260 kg payload) and goes straight to the vehicle without additional equipment.

A single tyre trolley holds two prepared sets of wheels. Up to 10 Loggyflex RT trolleys can be coupled together, so you move 20 sets of wheels in one go – and keep 20 prepared sets ready in the workshop on just 8 m².

Yes. With the coupling and drawbar kit, you can link up to 10 Loggyflex RT tyre trolleys into a tow train and move them all at once, e.g. with a small vehicle or forklift.

Yes. The tyre trolley has forklift pockets, so it can also be moved in three dimensions in multi-storey storage.

The Loggyflex RT has two independent braking systems, so the trolley can be locked securely in place – even fully loaded, on ramps and during loading. It is also forklift-compatible and can be lifted via its pockets.

Yes. Outside the changeover season, convert the Loggyflex RT tyre trolley back into a Loggyflex Standard trolley and use it for parts preparation or moving bulky goods, for example.

In three steps: you send us your floor plan, we send back a digital layout proposal with routing, aisle widths and rack configuration, and then the mobile tyre racking system is delivered and installed on request.

As a rule of thumb, around two sets of wheels per square metre at a ceiling height of 3 metres. Examples from completed projects: 774 sets of wheels on 340 m², 636 on approx. 292 m², 654 across a basement with four areas and 320 in a 16.5 × 9 m side room. A digital layout proposal tells you the exact capacity of your space.

Alongside the space analysis and rack configuration, you receive suitable terms and conditions for mobile tyre racking systems, proven processes for storage and retrieval, and costing advice – so your mobile tyre racking system pays off.

A fixed rack stays where it was built. LoggyStore units, by contrast, can be placed freely, so the layout proposal can try out different arrangements – lengthways, crossways, double rows, different aisle widths – until the storage capacity of the space is used to the full.

Yes. The examples range from a large 340 m² first floor to a narrow 16.5 × 9 m side room and a basement spread over several rooms – the units adapt to existing columns, doors and room shapes.

Arne Büchner, owner of unyco, supports you personally from the first idea to the fully stocked store. Since 2004, unyco has developed, manufactured and advised from a single source in Geisenhausen – with no intermediaries.

As wheels keep getting larger and heavier – not least because of electric vehicles – conventional high racking is reaching its limits. Aisles get narrower, some wheels can only be retrieved from one side, and lack of space often forces industrial trucks to store wheels impractically high overhead. The LoggyStore system eliminates this problem: the fully mobile units slide together flexibly, so you regain the full storage capacity of your existing space – and every wheel stays at grip height, with no overhead storage and no industrial trucks in the work area.

No, provided you use an existing space – such as vacant commercial premises, a workshop side room or a basement with a ceiling height of at least 3 metres. Since this is flexible business equipment in an existing room rather than a new building, there is no need for the planning permission procedure required to build your own tyre warehouse.

External storage in a wheel hotel usually means no immediate access to the tyres, dependence on delivery timing and a certain loss of control. With your own fully mobile tyre racking system, you bring autonomy – and the storage revenue that used to go elsewhere – fully back into your business. We also advise you on suitable add-on services such as wheel washing, tyre gas or balancing, to strengthen seasonal customer loyalty even further.